BIOS update procedure:

!! Copy your BIOS settings before you do any programming!!
!! Make a backup of your original BIOS!!
!! Do not programm the BIOS under Windows!!

1. Make a bootable floppy without Config.sys und Autoexec.bat.

2. Unzipp the BIOS file to that floppy.

3. Start Awdflash.exe.

4. Type in the file name. (eg. s56aw212.bin)

5. After programming turn of the power. Short jumper for the CMOS-Reset on your board.
   Leave the jumper closed for about 30 seconds.
   Remove the jumper and power your system up.

6. Enter your BIOS settings into the setup.


Tyan Computer is not responsible for any damage during the procedure.